CD-ROM if you want to save long:. .
1, with a good burn-up, working, make sure that you want to have for dye, etc..
2, storage location, to be no gray, dark, constant temperature. .
With these two points make sure your disk to save more than 10 years is not a problem.
Many people put the hands on the small plastic discs inside, this is very bad period of time will sound adhesion, will offer poor protection layer torn off. .
Proposed with large disc CD Po, vertical drop, this is a great deal of life.
On CD-ROM disk bag an important reason for this is easily broken, the disc is squeezed in the bag easily and change type, once the variant reading difficulties and so it is easy to sound like now. .
If you have money tight, the best way is to carve a CD classification back 50P CD buckets, the best there is, so the following 25P easy to find disk, each barrel in a LIST.
Do not worry, the bucket on the disk that they do not often move, is not designated mark, because each disk has a bulge, the bulge to KEEP the spacing between each plate. .
Do not take this pretended spare barrel, because each disk in the pail notwithstanding the spacing, but the space is small, if encountered while dynamic will sound disc and disc between the places, which then will cause the disc surface pitting ".."
Well, if you save well, and using a good drive, you save more than 10 years the disk is no problem. .
There is one final point is the most important, platters and jian Rong machinery, such as: my LG 16X carved RIDATA and BENQ is no problem, but also never measured through C2.
But a friend of mine engraved with his SONY to the same disk, the same batch, BENQ's performance had been good. Recognized occurrence of disk problems. .
The same dish, such as the Woodpecker CMC in my LG 16X on whatever speed is a large C2, C2 as high as several thousand to spare in other machines read quite difficult, and cannot completely COPY, there are plenty of bad road. But this CMC's Woodpecker in a friend's LG 48X but lithography is seldom C2, only 1, 2.
Therefore, the capacity of the disc and joint of the machine is to be noted. Relatively RITEK, RIDATA, BENQ the CDR has a good compatibility features. Carve the disk read quite smoothly. .
Blog network all rights reserved.
